El AMTG-2 Medidor Magnético de Espesor es un calibrador de espesores portátil. Se utiliza para medir el espesor de materiales no magnéticos, tales como plástico, vidrio, aluminio, titanio, cobre, etc. La precisión de la medición no se ve afectada por la forma de las muestras.

Está diseñado utilizando el principio del efecto Hall. Se obtiene una medición sencilla y precisa siguiendo los siguientes pasos:

• Coloque la esfera metálica a un lado de la muestra y la sonda en el lado opuesto
• Move the sample so the probe and ball are in the desired testing position.
• The steel ball will be drawn to the probe through magnetism, automatically.
• El sensor de efecto Hall en la sonda mide la distancia entre la punta de la sonda y la bola de acero.
• La medición se muestra en la pantalla táctil.

Ventajas:

• Non-destructive measurement.
• High resolution 7” touchscreen.
• Dynamic display: measurement of value / graph / date / hour / battery life.
• Fast and accurate measurement of the thickness.
• Can obtain accurate thickness measurements in corners, small radius areas and some irregularly shaped materials.
• Displays real-time measurement value.
• and Min. mode: Automatic capture of the maximum or minimum value.
• Value difference function: Display the value difference between preset value and actual measured value.
• “CYCLE” function: Record Max, Min, Average value & generate graph during a predefined time. “Delayed start & Auto-stop” function frees the hands of operator and is convenient for large-size sample measuring.
• Alarm function: Programmable, warns the high or low preset value by sound or visual indicator.
• Password function enables the safety of the calibration data and measuring data.
• Memorización de 9999 medidas.

Especificaciones técnicas:

• Measure mode: Normal / High accuracy
• Display mode: Real-time / Minimum or Maximum
• Resolution: 0.01mmor001 mm(0.001″ or 0.0001″)
• Display:TFT screendisplays thereal time reading, minimum reading, alarm status and data info
• Outputs:RS-232
• Calibration:Multi-point calibration (up to 13 points)
• Power : DC 8.4V
• Battery (optional):Rechargeable lithium battery. (Full loaded working time without charging is approximately 2-3 hours)
• Units:mm / Inch
• Idioma: Ingles
• Dimensions (control box): 210 x 150 x 65 mm / 8.3” x 5.9” x 3.3”
• Net weight:2 kg (Package weight: 5 kg)
• Measure range (by steel ball Ø):
  • Steel Ball Ø 5.00 mm / 0.197”: 1 to 10 mm / 0.04 to 0.39”
  • Steel Ball Ø 4.76 mm / 0.187”: 0 to 6.35 mm / 0 to 0.25”
  • Steel Ball Ø 3.18 mm / 0.125”: 0 to 4.57 mm / 0 to 0.18”
  • Steel Ball Ø 1.59 mm / 0.063”: 0 to 2.29 mm / 0 to 0.09”
  • (Custom made for other ranges)
• Measure accuracy (by steel ball Ø):
  • Steel Ball Ø 5.00 mm / 0.197”: 1% ±0.003
  • Steel Ball Ø 4.76 mm / 0.187”: 1% ±0.003
  • Steel Ball Ø 3.18 mm / 0.125”: 2% ±0.003
  • Steel Ball Ø 1.59 mm / 0.063”: 3% ±0.003
  • (Custom made for other ranges)

Standard configuration:

• Standard probe with cable and stand
• User manual
• Foot switch
• Power Charger
• Portable case
• AMTG-2 0-4 mm and 0-6 mm ranges:
  • 3 packs of steel balls: 1.59 mm Ø, 3.18 mm Ø and 4.76 mm Ø steel balls
  • 3 ball supports for the following Øs: 1.59 mm Ø, 3.18 mm Ø and 4.76 mm Ø
• AMTG-2 0-4 mm and 0-6 mm ranges:
  • 3 packs of steel balls: 3.18 mm Ø, 4.76 mm Ø and 5.00 mm Ø steel balls
  • 3 ball supports for the following Øs: 3.18 mm Ø, 4.76 mm Ø and 5.00 mm Ø ball supports

Elementos opcionales:

• Battery pack for up to 2-3 hours work disconnected from power.
• QUALIMESURE software
• Paquete de calibración